| Material: | Alloy Steel/Stainless Steel |
|---|---|
| Type: | Round Head |
| Connection: | Common Bolt |
| Samples: |
|---|
| Customization: |
|---|
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Product Name: Inverted Cone Chemical Anchor Bolt (Conical Anchor)
Material
. Alloy Steel Grade 5.8, 8.8,10.9,12.9
. Stainless Steel 50 70 80
Application
The fix of curtain wall keel corner code
Caulking cover plate and stair anchorage
Crash barrier, sound insulation wall
Steel structure, heavy load fix
Fix of the catenary and the escape platform
Anchorage of road, bridge, tunnel and concrete tension
Concrete overlay and structural joint reinforcement
Machinery, conveyor systems and warehousing systems
Characteristics
1.The adapting width range of anchoring is wide (4--20d, and >40mm, d stands for screw diameter).
2. lt is suitable for small spacing and small edging.
3.lt can match MT-500 Anchoring Adhesive. It can be used in the cracked concrete of the earthquake zone.
4.lt has high adhesive strength lt is suitable for large size steel bar and screw.And the effect is like embedding.
5.lt has excellent durability and welding resistance.
How to install chemical anchor bolts?1. To use ordinary impact drll to drl according to the specification and requirement ofthe anchor to make sure of the drlling depth, driled holediameter; The verticality, buried plate aperture and maximum clearance is according to the specification JGJ145 - 2013
2. To use the pneumatic pump to clean the hole, and the hole must be cleaned;
3. To install the adhesive nozzle on the adhesive gun. To check that whether there is spiral tube,if not it must be forbidden to use. lt is strictlyorbidden to pul out the spiral tube in the mouth of the adhesive injection on site. To fx special gun to the adhesive botle. To uniformly extrude theepoxy adhesive. The first three adhesive should be abandoned. To insert the nozze into the bottom of the hole, and slowly ift the extermal inectorwhile makind adhesive. The normal amount of the adhesive iniection is 2/3. The injection nozzle ofthe new plastic bottle should also be replacedwith a new one atter the adhesive s fnished, The adhesive iniection nozze shourd be removed if the achesive is unused, f the adhesive is unuseothe adhesive iniection nozzle should be removed. The adhesive mouth should be wiped clean. The plug should be plugged, and t can be used again
4. Before instalation, use a speclal tool with a low - speed electic dil to push the anchor boltinto the hole slowly at a unifor speed until the limitmark of the screw is flush with the plane of the concrete base material.
5. To wait for the solidify ofthe anchorage. And then bury the plates and other anchoring materials.
Pharmaceutical Anchor Bolts
| Specification | Thread Nominal | Nominal Length | Drilling Diameter ( mm ) |
Drilling depth ( mm ) |
Maximum Anchor Thickness ( mm ) |
Design tension | Breaking tension | Design shear | Breaking shear | Outer diameter of flat mat ( mm ) |
Inner diameter of flat mat ( mm ) |
Thickness of flat pad ( mm ) |
Pitch | Combination of nuts on the length of the side ( mm ) |
Thickness of combination nut ( mm ) |
| 8 | M8 | 100 | 10 | 80 | 20 | 10.2 | 28.3 | 10.2 | 28.3 | 17 | 8 | 1 | 1.25 | 18 | 8 |
| 10 | M10 | 100 | 12 | 90 | 20 | 14.5 | 34.5 | 14.5 | 34.5 | 20 | 10 | 2 | 1.5 | 22 | 8 |
| 12 | M12 | 100 | 14 | 110 | 20 | 20.8 | 46 | 20.8 | 46 | 24 | 12 | 2 | 1.75 | 25 | 10 |
| 14 | M14 | 100 | 16 | 120 | 20 | 25.1 | 66 | 25.1 | 66 | 27 | 14 | 2 | 2 | 28 | 12 |
| 16 | M16 | 100 | 18 | 130 | 20 | 32 | 90 | 32 | 90 | 30 | 16 | 3 | 2 | 35 | 14 |
| 18 | M18 | 100 | 22 | 130 | 30 | 39.8 | 106 | 39.8 | 106 | 35 | 18 | 3 | 2.5 | 38 | 16 |
| 20 | M20 | 100 | 24 | 140 | 30 | 54.6 | 135 | 54.6 | 135 | 35 | 20 | 3 | 2.5 | 40 | 18 |
| 22 | M22 | 100 | 26 | 190 | 30 | 63.6 | 150 | 63.6 | 150 | 40 | 22 | 4 | 2.5 | 45 | 20 |
| 24 | M24 | 100 | 28 | 210 | 30 | 80.2 | 195 | 80.2 | 195 | 50 | 24 | 4 | 3 | 48 | 22 |
| 30 | M30 | 100 | 35 | 280 | 30 | 108 | 231 | 108 | 231 | 50 | 30 | 4 | 3.5 | 50 | 24 |
Changzhou Ningsheng Hardware & Electrical Appliance Co., Ltd. is a professional hardware manufacturing company specializing in wedge anchor bolts and other fastener parts. The company covers an area of 15,000 square meters and is located in Hengshanqiao Town, Changzhou Economic Development Zone, Jiangsu Province.
Since its establishment in 2000, the company now has more than twelve mature automatic production and assembly lines, with an annual output of more than 7000 tons of hardware accessories. The company's main products include: various types of wedge anchor bolts(GB/DIN/ANSI), the hex bolts, the screw, the washers and other products.
Our factory has always been based on good faith management, product quality as the core, customer demand as the guidance, to provide customers with cost-effective products. At present, it has provided high quality products and services for many retailers and many well-known elevator manufacturers in China so far.
Our logistics and packaging are reliable and trustworthy!
The company has a group of high-quality technical personnel, sophisticated equipment, perfect monitoring facilities. We also have GB/T19001-2008/ ISO9001:2008 international quality system certification.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}